Home/Field Notes/Tone Recipes
A sunburst semi-hollow electric guitar on its strap beside a floor multi-effects unit on an empty church stage in soft morning light
No. 455Tone Recipes·November 20, 2026·7 min read

Blessed Be Your Name Guitar Tone on the Line 6 Helix (Matt Redman)

Blessed Be Your Name on the Helix: keys and BPM for six recordings, capo shapes for the interlude, and a four-snapshot preset built around the vamp.

Blessed Be Your Name moves faster than most of the slow builds a worship set leans on. MultiTracks lists its recordings between 114 and 120 BPM, and PraiseCharts files the 2002 original under "Rock" and "Med Fast." That changes the electric's job. Instead of long swells under a held chord, the guitar carries rhythm: a driving strum in the choruses, a repeating figure through the vamps and interludes, and a bridge that builds over three passes. The tone needs some grit, a delay short enough to stay out of the strumming's way, and a capo plan, because the key moves more between versions than the tempo does.

RecordingKeyBPMLengthDotted 1/81/4
Matt Redman, Where Angels Fear to Tread (2002)B (PraiseCharts)not published5:06——
Tree63, The Answer to the QuestionDb (PraiseCharts)not published———
The Worship Initiative, Vol. 3 (2014)B1144:23395 ms526 ms
Matt Redman, Let There Be Wonder (Acoustic) (2020)A1163:53388 ms517 ms
Matt Redman, Coming Back to the Heart (live, 2024)Bb1164:48388 ms517 ms
Maranatha! Music, Top 25 Praise Songs 2012B1205:12375 ms500 ms

Keys and BPMs for the last four rows are from MultiTracks; all are in 4/4. Matt and Beth Redman wrote the song (CCLI 3798438, Thankyou Music). WorshipTogether lists its original key as A at 120 BPM, which likely reflects the 2004 live recording rather than the B-major studio original, so if your chart says A, that's why. Tree63's 2003 single took the song to No. 2 on Billboard's Hot Christian Songs, and plenty of teams still learned it from that cover.

One Set of Shapes, Five Capo Positions

The key spread looks like a problem until you notice the chords are the same four in every version. Play them as open A-shape voicings and move the capo:

KeyCapoUsed by
AnoneRedman acoustic (2020), WorshipTogether chart
Bb1Redman live (2024)
B22002 original, Worship Initiative, Maranatha
C3MultiTracks He Reigns recording
Db4Tree63

PraiseCharts charts the 2024 live interlude in Bb as Bbmaj7, F4, Gm7 and Ebsus2+4. With capo 1 and A shapes, that's:

  • Amaj7: x02120
  • E4 (Esus4): 022200
  • F#m7: 2x2220
  • Dsus2+4: x00030

The open high E string rings through all four, and the open A string through the first and last, which is what gives the interlude its shimmer without a pad: one note holds still while the chords move under it, so the figure sounds bigger than four chords should. In B with capo 2, the same shapes give Bmaj7, F#4, G#m7 and Esus2+4.

Where the Electric Actually Spends Its Time

I expected a verse-chorus rock song with a short bridge, and for the 2002 original, PraiseCharts' section list (verse, pre-chorus, chorus, verse 2, bridge) fits that. The 2024 live map is different. MultiTracks lays it out as Verse 1, Pre, Chorus, Verse 2, Pre, Chorus, Vamp, Interlude ×2, Bridge ×3, Vamp, Chorus ×2, Vamp, Interlude ×2, Chorus, Ending. Count the instances: two verses against three vamps, four interludes and three bridge passes. In under five minutes, the electric plays the interlude figure more often than it plays verse rhythm.

That's a reason to build the preset around the interlude rather than the verse. The verse can be simple. The interlude sound is the one people will hear most and remember.

The Helix Preset

Set the preset tempo to your version (116 for either Redman recording) or let the click drive it over MIDI clock. Delay times are note values, so the same preset covers 114 to 120 BPM.

BlockSettingsWhy
Deluxe CompThreshold −22 dB, Ratio 3:1, Mix 50%Evens out the interlude's picked figure; light enough not to squash the strum
Kinky BoostGain low, Level about +3 dB over bypass; on from chorus 1A clean push into the amp for the choruses
Scream 808Gain 3, Tone 5.5, Level 6; off until the bridge's second passThe extra grit for the build
Matchstick Ch1Drive 4, Bass 4.5, Mid 6, Treble 5.5, Ch Vol to tasteEdge of breakup with clear note separation, so open strings stay distinct when the drive is on
2x12 Match H30Low Cut 90 Hz, High Cut 7 kHzSame family as the amp; the high cut keeps the strum from fizzing in in-ears
Transistor TapeTime 1/8 dotted, Feedback 25%, Mix 18%Moves under the strum without filling the gaps between strokes
PlateauxDecay 1.8 s, Mix 18%, Low Cut 200 HzShort enough that eighth-note strums at 116 BPM stay separate

At 116 BPM an eighth note lasts 259 ms. Long repeats or a 4-second hall turn a strummed chorus into one gray block, so the delay and reverb on this song sit lower than on a slow ballad. More wash belongs in the bridge, and only for the passes where the band drops back.

Four Snapshots for the 2024 Live Arrangement

SnapshotWhereChanges
1: VerseVerses, pre-chorusesKinky Boost off, Scream 808 off, delay 15%, Plateaux 15%
2: ChorusAll chorusesKinky Boost on, delay 18%, Plateaux 18%
3: Vamp / InterludeVamps and interludesKinky Boost on, delay 25% with Feedback 35%, Plateaux 25%
4: Bridge buildBridge passes 2 and 3Kinky Boost and Scream 808 on, delay 22%, Plateaux 22%

Play the bridge's first pass on snapshot 1 with the guitar volume rolled back to about 7, then step to snapshot 4 for the second pass and roll the volume back up for the third. Three passes need three levels, and two of them can come from your hands. For the 2002 original or a shorter four-verse chart (Tree63 and The Worship Initiative both label four verses), snapshots 1, 2 and 4 cover the song and 3 is optional.

Other Platforms

  • HX Stomp: drop the Kinky Boost and use the amp's Ch Vol plus a snapshot for the chorus lift. Comp, Scream 808, amp, cab, Transistor Tape and Plateaux are six blocks.
  • Quad Cortex: an edge-of-breakup Matchless or AC-style capture with a tube-screamer block in front, a tempo-synced tape delay at a dotted eighth and a short plate. If you play the Redman live version one week and Tree63's the next, save a preset per tempo, or set the tempo to Global and change it from the click.
  • Pedalboard: a low-gain boost always on from the chorus, a mid-hump overdrive for the bridge, and a delay tapped at the song's quarter note with the dotted-eighth division. Any delay covers this: 395 ms is the longest dotted eighth in the table.

Before Rehearsal

Check two things with your worship leader: which recording the team learned, and which key the vocalist wants. The capo table handles the second; the tempo column handles the first. For more songs in the same set, see the builds for Build My Life and Way Maker, and the worship Helix hub for the core preset these snapshots grow from.

Frequently asked

What key is Blessed Be Your Name in?
PraiseCharts gives B as the original key of the 2002 recording on Where Angels Fear to Tread, while WorshipTogether lists A. MultiTracks has Matt Redman's 2024 live version in Bb and his 2020 acoustic version in A, and PraiseCharts has the Tree63 cover in Db.
What is the BPM of Blessed Be Your Name?
MultiTracks lists 116 BPM for Matt Redman's 2024 live and 2020 acoustic versions, 114 for The Worship Initiative and 120 for two other recordings. WorshipTogether gives 120. No BPM is published for the 2002 studio original, so set the tempo from the version your team learned.
What delay setting works for Blessed Be Your Name?
A dotted eighth synced to tempo at about 18 to 22 percent mix: 388 ms at 116 BPM and 375 ms at 120. Keep feedback low, around 25 percent, so the repeats don't blur a driving eighth-note strum.
Where do I put the capo for Blessed Be Your Name?
Using A-shape chords, no capo for A, capo 1 for Bb, capo 2 for B, capo 3 for C and capo 4 for the Tree63 key of Db.
Who played guitar on the original Blessed Be Your Name?
No per-track guitar credit or rig has been published for the 2002 recording that we could find. This build is a way to get the sound on a Helix, not a copy of a documented rig.