No. 2051983·heavy-metal·4 blocks

Bark at the Moon

The riff that had to follow Randy Rhoads, played on a rig that shares almost nothing with his. Jake E. Lee cut it at Ridge Farm in 1983 on his blue-burst Charvel San Dimas -- a Seymour Duncan JB in the bridge, DiMarzio SDS-1 single-coils elsewhere -- through a Jose Arredondo-modified Marshall he carried over from California. Where Rhoads got his sustain from an under-volted Plexi, Lee got his from a cascading-gain mod, which is why the riff is tighter and more percussive than anything on Blizzard of Ozz.

Bark at the Moon coverBark at the Moon
Settings for
Signal path · input → output · 9 blocksLive values · Line 6 Helix
Guitar
Charvel San Dimas Style 1 (blue burst)
Pickups
HSS
Tuning
bridge
Strings
standard
Noise Gate
Deluxe Comp
Brit 2204
4x12 Greenback 25
Deluxe Flange
Simple Delay
Room
Tilt
Noise Gate
← Gain-structure housekeeping
Cab
Threshold
-58dB
Decay
18s
Deluxe Comp
← Studio compression
Dynamics
Threshold
-24dB
Ratio
2.5:1
Knee
4dB
Attack
15ms
Release
130ms
Mix
30
Level
0dB
Brit 2204
← Marshall 100W (Jose Arredondo mod)
Amp
Drive
7.5
Bass
4
Mid
5
Treble
7
Presence
6
ChVol
5
Master
10
Bias
5
BiasX
5
Sag
3.5
Hum
4
Ripple
4
4x12 Greenback 25
← Marshall 4x12 (Celestion-loaded)
Cab
LowCut95Hz
HighCut5500Hz
Resonance
5
Level
0dB
Pan
0.5
Delay
0
Deluxe Flange
← Ibanez SF10 Swell Flanger
Modulation
Rate
0.3Hz
Depth
45
Mix
35
Level
0
Simple Delay
← Studio delay
Delay
LowCut240Hz
HighCut4000Hz
Time
280ms
Feedback
10
Mix
9
Level
0
Room
← Ridge Farm tracking ambience
Reverb
LowCut190Hz
HighCut6800Hz
Mix
13
Decay
1s
Predelay
18ms
Level
0
Tilt
← Global tilt EQ
EQ
Tilt
0.5
CenterFreq
1100Hz
Level
0

What we checked

Computed by a program, on this recipe, every time this page is built. How this works

Preset files — 0 of 3 complete
  • Helix 1 block missing from the file
    Which ones

    Not in the file: Deluxe Flange. The recipe calls for this block, but we have no verified model ID for it on this platform, so the preset is written without it. Add it by hand using the settings above.

  • Quad Cortex 5 blocks replaced with a stand-in model
    Which ones

    Replaced with a stand-in: Gate, Studio Comp, 4x12 Greenback, Flanger, Room Reverb. These load cleanly but are not the model named above — the file will sound wrong here until we map them. Set these blocks by hand.

  • Katana 2 blocks missing from the file; 5 blocks replaced with a stand-in model
    Which ones

    Not in the file: Delay, Reverb. The recipe calls for these blocks, but we have no verified model ID for them on this platform, so the preset is written without them. Add them by hand using the settings above.

    Replaced with a stand-in: Brown, Booster, FX, Delay, Reverb. These load cleanly but are not the model named above — the file will sound wrong here until we map them. Set these blocks by hand.

Helix DSP
59.4% of one chip — fits
Sources
4 cited, 1 from publications that do original gear reporting
Attribution
Not yet rated — This recipe predates the attribution-confidence field and hasn't been reviewed for it.
What we didn't check
  • Nobody played this through a real amp. There is no human listening test behind any number on this page.
  • The settings are reasoned from the sources below, not measured off the record.
  • No audio has been rendered for this recipe yet, so you cannot hear it before you load it.
  • 3 platforms on this page (TONEX, Kemper, Fractal) get a model pointer, not a preset file — nothing was built or checked for them.
The mic in this chain

Shure SM57

Still made, still the studio default. The cheapest part of this chain to get right.

Affiliate links — we may earn a commission at no extra cost to you, and as an Amazon Associate we earn from qualifying purchases. The mic is listed because the chain uses it, not because anyone paid for the placement.

Rate This Tone

...

(0 ratings)

Sign in to rate this recipe.

Comments

Sign in to leave a comment.