Home/News/New Gear/Valeton's VDS Series: Three €119 Dual-Engine Stereo Pedals, and the Pitch Shifter Is the One HX Stomp Owners Should Watch
Valeton's VDS Series: Three €119 Dual-Engine Stereo Pedals, and the Pitch Shifter Is the One HX Stomp Owners Should Watch
New GearNovember 11, 2026·5 min read·via gearnews.com

Valeton's VDS Series: Three €119 Dual-Engine Stereo Pedals, and the Pitch Shifter Is the One HX Stomp Owners Should Watch

Valeton's new VDS-1D (delay and reverb), VDS-2D (dual modulation) and VDS-3D (dual pitch shifter) each run two engines in true stereo for €119. The pitch shifter is the interesting one: it does a job that eats a huge share of DSP on an eight-block modeler.

Valeton just announced the VDS Series, three stompboxes that each run two effects engines in true stereo (stereo in, stereo out) for €119 apiece. One does delay and reverb, one does modulation, and one is a dual pitch shifter. On all three, holding both footswitches while you power up flips the pedal between true bypass and buffered bypass. That's a small detail, and it's the one that tells you somebody at Valeton has actually built a pedalboard.

There's no US price yet. Thomann lists all three as "on request," and Gearnews expects delivery to take at least two to three months. So this is an announcement, not something you can buy this weekend.

What's in the three boxes

VDS-1D Delay & Reverb

  • Reverb engine: hall, plate, spring, or shimmer (octave-up). Controls are decay, FILTER (tone) and R-MIX (wet/dry).
  • Holding the reverb footswitch freezes the tail.
  • Delay engine: digital (STANDARD), BBD, or tape. Controls are TIME/DIV, DB (feedback) and D-MIX.
  • Holding the right footswitch puts it into tap tempo.

VDS-2D Dual Modulation

  • Engine 1: phaser, flanger or chorus. Engine 2: rotary, envelope filter or tremolo.
  • Controls are speed, depth and two MORPH knobs. MORPH 1 sets engine 1's wet/dry mix in series (STEREO) mode, or the balance between the two engines in parallel mode. MORPH 2 is context-dependent: rotary mic position, filter cutoff or tremolo waveform.
  • Each engine gets its own footswitch and, unusually, its own tap tempo.

VDS-3D Dual Pitch Shifter

  • Two pitch engines set to different intervals, each with its own PITCH knob.
  • A WET B sets the volume ratio between the two engines, and DRY sets the unprocessed level.
  • Three glide modes on a mini switch, with RISE (glide-up speed) and FALL (return speed) controls.

Why the pitch shifter matters if you run an eight-block modeler

I run an HX Stomp, and here's the thing I keep running into: pitch is the most expensive thing you can put on a small modeler. We broke down the actual numbers in what polyphonic pitch blocks cost in DSP and whether they're worth it. The short version is that one good harmony or poly-shift block can take a share of the chip that would otherwise run your amp, cab and a couple of drives.

A two-voice pitch pedal with its own dry control does that job off the chip entirely. Gearnews says it sounds like a polyphonic shifter, but that's one listener's early impression, not a measured spec, so wait for demos before trusting the tracking. If it does track cleanly, here's how I'd wire it up:

  • Before the modeler, in front of the amp block, if you're using it for octave-down riffs or a fake 12-string. Set DRY to unity and bring one engine up an octave at low A WET B. Pitch shifters track best on a clean, uncompressed signal, so it goes first.
  • In the modeler's send/return, if you want harmonies or shimmer-style pads after the dirt. We cover the routing in send/return loop tricks beyond shimmer. Keep in mind the Stomp's two sends and returns only become one stereo loop when you pair them, so running the pedal in stereo uses up both.
  • Glide modes are the part a modeler block usually won't do from one switch. Set RISE slow and FALL fast and you get a whammy-style pitch scoop on press with a quick snap back on release. Set both slow and you get the slow-rise pad that ambient players build with an expression pedal.

The delay/reverb box is the worship-board sleeper

The VDS-1D's shimmer reverb plus hold-to-freeze covers most of what an ambient worship player builds a pad patch for. That's the move we describe in faking a synth pad on guitar with freeze and hold. If you're on a budget and don't own a big reverb pedal, our shimmer without a BigSky guide covers where to land decay and mix. Those starting points should carry over: keep R-MIX lower than feels right, because shimmer turns to mud fast in a full band.

The catch: the gear coverage doesn't say whether the delay and reverb can be set parallel or only run in series, and there's no mention of presets, MIDI or power draw. On a worship board where one song needs a dotted-eighth and the next needs a pad, no presets means bending down between songs. That's fine for a lot of players, but check it before you assume this pedal replaces a preset-driven ambient box.

Stereo, done right this time

True stereo in and out across all three matters more than the price. Plenty of budget "stereo" pedals sum the input to mono, which kills anything stereo coming from upstream. If you run a wet/dry or two-amp rig, read stereo signal chain architecture before you buy. Then check your patch in mono at front of house, because a dual-engine pedal in parallel mode is exactly the kind of thing that sounds huge in stereo and phase-cancels in mono. Our stereo width tricks that survive mono guide is the check.

Should you care

If you have a full Helix or a big board with a Strymon or Eventide on it, no. If you're on an HX Stomp, an HX Stomp XL or any eight-block box and you keep running out of DSP whenever you add a harmony or octave block, the VDS-3D might be the cheapest way to free up the chip. We don't have demos, a US price or a ship date yet, so don't preorder based on a parameter list. But this is the first budget dual-engine pitch pedal that's earned a spot on my watch list.