No. 1332004·nu-metal·5 blocks
Before I Forget
The driving, anthemic drop-B riff of Slipknot's Grammy-winning single. Like the rest of Vol. 3, 'Before I Forget' was cut with Rick Rubin — and the bulk of the guitar wall is Jim Root's Reinhold Bogner-modded Uberschall, 'an Uberschall on steroids,' with Mick Thomson's VHT Pitbull on the other side. This is the actual recording rig, not the later Rivera/Orange touring setup. The tone is tighter and more mid-present than Iowa — the band's first Pro Tools record.
Signal path · input → output · 5 blocksLive values · Boss Katana
Guitar
Fender Telecaster (dual-humbucker, pre-signature)
Pickups
HH
Tuning
bridge
Strings
drop B (B-F#-B-E-G#-C#)
Noise Gate
Booster
Brown
Plate
Noise Gate
← Noise gate
Threshold
52dB
Release
25s
Level
0
Booster
← Optional tightening boost (not on the original)
Drive
30
Bottom
55
Tone
55
Level
70
Brown
← Bogner Uberschall (modded)
Gain
7
Volume
6
Bass
5
Middle
6
Treble
6
Presence
6
Master
6
Plate
← Studio ambience (minimal)
Time
3ms
PreDelay
12ms
Tone
4
EffectLevel
4
Engineer's note
File 133
The driving, anthemic drop-B riff of Slipknot's Grammy-winning single. Like the rest of Vol. 3, 'Before I Forget' was cut with Rick Rubin — and the bulk of the guitar wall is Jim Root's Reinhold Bogner-modded Uberschall, 'an Uberschall on steroids,' with Mick Thomson's VHT Pitbull on the other side. This is the actual recording rig, not the later Rivera/Orange touring setup. The tone is tighter and more mid-present than Iowa — the band's first Pro Tools record.
— Jim Root
Sources · Verified by


